- Cabinet/Trailer Assembly:
- Integrated Heating and Cooling System ready for use
- Completely prewired
- System Controls from one panel
- Electronic Air Filter
- High Efficiency A/C, Heating Unit
- onboard Electrical Generator
|
 |
Industrial Cabinet
- Welded Steel Cabinet Panels
- Access Doors With Lockable Latches
- 2” Thick Sound Attenuated Cabinet Panels
- Primed and Painted With High Build Catalyzed Polyurethane
Paint System
- Full Opening Access Hood for generator service
- Lifting Lugs For Service & Shipping
|
 |
Trailer:
- Custom built-in Trailer with the following features:
- External Fuel Tank with 3/16” Aluminum Checker Plate cover
- 3500# GVWR
- Torflex Axel Air ride suspension
- 16.5’ Heavy Duty Load Range E, Trailer Tires
- 2” Receiver ball connection with safety chains
- 6 Way Electrical Plug for Standard Connection
- Full Trailer lightning system
- Permanent Ramp for easy shelter storage
- 2000# Swivel Mount Jack
- 3/16” Aluminum checker Plate Trim
|
 |
Generator
- Sized To Meet A/C Load + 15%
- 20 hour run time at 50% load
- Cast Iron Cylinders Sleeves for long life
- Low Oil pressure/High Oil Temperature cut off to protect
engine
- 12 Volt Battery for electric start
- Industrial Cabinet with full opening hood for service access
- Access doors for service and maintenance
- Custom tuned exhaust system for improved acoustic performance
- OSHA rated to 80 dba at 3 ft.
- Sound resistant cabinet to attenuate engine and exhaust
noise
- built-in-in Electrical load panel with circuit breakers for
protection
- Custom Fuel Cell with fuel gauge
- Vertical exhaust stack for reduced ground level emissions
- Prewired Generator with quick connections for removal &
Service
|
 |
Unit Mounted Control Panel
- 12 Volt Back-lit control panel lighting system (for nighttime
operation)
- Equipment Control (On/Off) Industrial Rocker Switches
- UL Listed Panel (Approval Pending)
- Clear View Inspection Window
- Voltmeter
- Run time Hour Meter
- built-in-in Circuit Breakers and Fuses
- Electrical Load Transfer Switch
- Microprocessor Temperature Control System
- Vandal proof lockable door
- 12-Volt Battery Kill Switch
- Full Engine Controls
- The trailer has a built-in-in ground stake
- Electrical Grounding – this helps to prevent any
differential electrical voltage between the trailer and the
ground. In short, it reduces the possibility of electrical shock
to the operator.
|
 |
Air Conditioner
- High Efficiency Air Conditioner
- Electric Resistance Heating
- Solid State Microprocessor Control System
- Low Ambient operation for harsh environments
- Condenser Coil protection Guard
- PVC Condensate Drain Pan for easy maintenance
- High and Low refrigerant pressure Safety Cutouts
- 2” Pleated Media filters
|
 |
Shelter Standard Features
- Portable Air Shelter
- Rapid Deployment in less than 15 minutes
- 200/400 Denier High Strength UV stabilized PVC coated fabric
- Water Repellent
- Fire Resistant
- Cold Temperature limit (-30f)
- High Temperature Limit (+150f)
- Tensile Strength (250 LBS)
- Mildew Resistant Coatings
- RF Welded Seams
- 360 degree Clear View Windows
- Double Insulated White Reflective Roof to reduce solar load
|
 |
Integral Floor Canvas
- Allows occupants a finished floor regardless of ground
conditions
- 400 Denier Heavy Fabric for protection from rough surfaces
- Extra tarp to helps protect the shelter while in storage
|
|
Structural Air Frame
- Once filled to design pressure no additional pressure is
required to maintain shape
- Capable of supporting 150lbs at center of structure
- Optional Water Ballast System for windy conditions
- (10) Tie-down straps to secure movement
|
 |
Access Doors
- Two per shelter (Front and Back)
- 8” Clear Warehouse strip type walkthrough doors
- Self sealing for minimal infiltration of outside air
- Lockable Zipper Door Covers for Security
- Meets NFPA access requirements
|
|
House remote electrical power supply
- Double Seamed Supply and Return Duct connections for
Conditioned Air
(with supply air grill)
- High-pressure air fill port for the Air Frame
- for remote electrical power supply
- Quick Fill air port for inflation and deflation
- Hose connections for water ballast tubes
- Over pressurization pop off valve for Air Frame
- Fuel Tank with gauge
|
|
End Wall Zipper Connections
- (2) Full edge zipper connections for end wall removal
- (2) Full edge zipper connections for multiple shelter
|
|
